Step 1

Locate shade dimensions on label. The sticker on the paper band that notes the order dimensions. The first dimension calls out the order width.

Step 2

Mark the width of the shade with two lines. Then, mark where the bottom of the brackets should be.

Step 3

Attach the mounting plate to bracket by snapping it into place.

Step 4

Position and level brackets; mark screw locations. Align outer edge of bracket with marks made on previous step. Then mark screw hole locations.

Step 5

Drill holes; Secure both brackets using the selected mounting screws.

Step 6

Slide bracket covers onto brackets.

• Bracket needs to be tucked underneath the bracket cover lip when fully attached.
• The bracket cover should be completely flush with the bracket cover lip.